Russell Professional Pond & Pondless Products
HBV-21 Koi Pond Filter
Highly Efficient, Easy to Clean,
No Blower Required for Backwashing
Features:
- Koi Pond Filter Dimensions: 21″, wide x 28″ tall
- For ponds up to 5,000 gallons
- Flow rates up to 3,500 gph (58 gpm)
- 1½” multiport valve
- No air blower required for backwashing
- 2” inlet vortex lateral for maximum internal water flow
- 2” vertical outlet lateral for maximum internal water flow
- Spun Wound Fiberglass Tank
- Up-flow design with internal vortex
- 1½” unions on inlet, return, and waste.
- Green color to blend into the landscape
- Filtration down to 100 microns
- Bio absorption down to 5 microns
- Vortex solids separator
- Settling cone for debris capture
- Vortex drain at bottom of settlement area
-
Floating media above vortex settling area
- Vertical outlet/backwash lateral
- Efficient Backwash
- 2.5 cubic feet of HydroFoam™ bead bio media
- 2,211,840 beads (@ +/- 884,736 beads per cubic foot)
- 1,130.50 Total Specific Surface Area (SSA)
- Metabolizes up to 22,610 mg ammonia per 24 hours
- Supports 5,653 grams of fish in 5,000 gallons of water
- Stainless steel hardware
- Removable access lid
- Backwash water viewing port
- ¾” vortex drain valve with internal screen
- For best performance, use with a HydroSieve™ Pre-Filter
HydroBead™ Vortex HBV-21 Koi Pond Filter Systems
High Surface Area Biofilter Reaction with
Superior Water Polishing in One Unit
The HBV-21 HydroBead™ Vortex 21" filter for koi pond is a professional water polishing filter that combines high SSA biofilter media with superior water polishing for clean and healthy water for your koi fish and other pond fish.
The HBV-21 koi fish pond filter features a vortex for heavy solids removal, a bio filter stage for metabolizing dissolved organics, and superior water polishing. The unique design and media backwashes with less water than competing filters. No air blower is required for backwashing.
High Surface Area Bio Reaction Koi Pond Biofilter and
Superior Water Polishing in One Unit
Long After Price has been Forgotten, Value, Quality, and Piece of Mind are Not.
High Surface Area Bio Reaction with
Superior Water Polishing in One Unit
No Air Blower Required for Backwashing
HBV-21 Benefits:
- Assembled in the U.S.A.
- Highly efficient koi pond filter
- Filter for up to a 5,000 gallon pond
- Flow rates up to 3,500 gph (58 gpm)
- Easy to clean
- Simple, easy backwash
- Backwashes with less water than competing filters
- No air blower required for backwashing
- Superior water polishing for sparkling water
- Extra Strength Spun Wound Fiberglass tank
- Super lightweight Styrofoam HydroBead™ bio media
- Polishes water for maximum clarity and shine
HBV-21 Koi Pond Filter Backwashes
With Less Water:
The vertical backwash lateral jet inside the HydroBead™ Vortex HBV-21 koi pond filter reduces backwash time which results in less water use and eliminates the backwash “dead-zones” that occur within other brands of bead filters that feature horizontal backwash laterals.
The HBV-21 medium koi pond filter’s unique design eliminates the need for expensive, difficult to use, and aggravating air blowers that competing bead filters require for backwashing.
Polishes Water for Maximum Clarity and Shine:
The super lightweight Styrofoam HydroBead™ media inside this 21″ bead filter cling together under pressure to trap fine particulates down to 100 microns and polish the water during filtering. The HydroBeads™ easily separate during backwash to release the trapped particulates.
The HydroBead™ Vortex HBV-21 medium koi pond filter is a professional bead filter that combines high SSA with superior water polishing for clean and healthy water for your koi and pond fish. The HBV-21 medium koi pond filter features a unique design that eliminates the need for costly and difficult to use air blowers for backwashing – saving you time, aggravation, and money.
Because of the unique HBV-21 medium koi pond filter design, it uses much less water during backwashing. The vertical backwash jet inside the HydroBead™ Vortex HBV-21 medium koi pond filter eliminates backwash “dead-zones” that occur in other brands of bead filters that have horizontal laterals.
HBV-21 Koi Pond Filter Superior Water Polishing
The super lightweight Styrofoam HydroBead™ media inside the HBV-21 medium koi pond filter cling together under pressure to trap fine particulates and polish the water during filtering. The beads easily separate during backwashing to release the trapped particulates. The HBV-21 medium koi pond filter is truly in a class all it’s own.
For clean healthy pond water coupled with superior water polishing, easy and complete backwashing – without the need for an air blower – the HydroBead™ Vortex HBV-21 medium koi pond filter is the perfect filter for your 5,000 koi pond.
The HBV-21 HydroBead™ Vortex filter truly is in a class all it's own. For clean healthy pond water coupled with superior water polishing, easy and complete backwashing - without the need for an air blower - there are only HydroBead™ Vortex bead filters.
Bead Filters That Require Air Blowers
for Backwashing Are Less Efficient
and Have a Higher Cost of Ownership
than HydroBead™ Vortex
- Their designs don't let them backwash with just water
- They use bio media that doesn't backwash with just water
- Their bio media is either heavy, porous, or both
- Their bio media "clumps" together
- "Clumping" bio media must be broken up with high air pressure bubbles
- Air blowers add to the cost of the filter
- Air blowers require additional steps for backwashing
- Additional steps mean more time to backwash
- Air blowers require additional plumbing
- Additional plumbing increases installation time
- Air blowers fail over time and must be replaced
- Replacing air blowers increases the cost of ownership
- Air blowers are loud
- These filters are an eyesore in the landscape
- These filters ruin the natural look of the pond
There are many brands of koi pond bead filters that require air blowers for backwashing. The air blower sticks out like a sore thumb on the filter. These air blowers are very loud - more than triple that of a hair dryer.
Do YOU want to have to wear ear plugs just to backwash your filter?
We don't think so.
Also, do you want to look at a filter like any one of these near your beautiful koi pond? Many people build a shed to hide these filters - that also adds to the cost of the filter! Building a filter shed also increases your installation time - and requires additional pipe. Yup, you guessed it! That significantly adds to the cost of the filter too! If you don't build a filter shed - do you want to scare your fish with a loud air blower?
If you don't build a filter shed you'll also make every dog in your neighborhood bark every time you backwash your filter. Your neighbors won't be too happy with you.
The Question to Ask is: Why is an Air Blower Required for Backwashing?
The answers we found after testing and researching these types of bead filters is simple:
-
They have flaws in their overall design
- They have design flaws in their water flow
- They have design flaws in their water direction
- They have design flaws in their bio media
- The bio media is heavy
- The bio media is porous
- The bio media clogs
- The bio media clumps together
- The bio media is hard
Now, not every filter has all the above, but if it requires an air blower for backwashing, you can be sure that it has at least one or more of these problems.
-
Down flow water direction during filter mode traps debris on top of floating bio media - requiring an air blower to force high pressure air bubbles up through the media to lift the trapped debris to purge it from the filter
-
Heavy - or sinking bio media such as glass beads or clay beads require downward water flow during filter mode that results in the same backwashing requirements as floating bio media in a down-flow design.
-
Porous bio media requires high pressure air bubbles to dislodge debris trapped within the bio media
- Ring type and bio-ball type media clump together requiring high pressure air bubbles to break them apart.
Compare With The Benefits You Get With HydroBead™ Vortex
HydroBead™ Vortex* filters feature a unique design that eliminates the need for costly and difficult to use air blowers for backwashing - saving you time, aggravation, and money. Because of the HydroBead™ Vortex filter design, it not only doesn't require an air blower, it uses much less water during back flushes. The vertical backwash jet inside HydroBead™ Vortex bead filters eliminates backwash "dead-zones" that occur in other brands with horizontal backwash laterals.
The super lightweight Styrofoam HydroBead™ media inside the bead filter cling together under pressure to trap fine particulates and polish the water during filtering, and easily separate during backwashing to release the trapped particulates.
For clean healthy pond water coupled with superior water polishing, easy and complete backwashing - without the need for an air blower - there are only HydroBead™ Vortex bead filter.
* This video shows our older version with a clear lid, the new lids are solid. The old lids tended to crack over time, so we replaced the lid with a much stronger and heavy duty lid.
